Dodo Juice Apple iFoam Snow Foam 1L Concentrate

Dodo Juice Apple iFoam Snow Foam Wash offers rich, thick lather foam to be used with your Snow Foam Lance as a Pre-Wash. Apple iFoam is pH-Neutral so will not remove any wax or sealant layers, but will gently remove dirt and contaminants from your paint - before you carefully wash with your twin bucket wash system and your favourite Dodo Juice Wash Shampoo.

Product Features and Benefits:

• Highly concentrated snow foam concentrate
• Fruity apple scent
• Safe for use on all surfaces
• Provides a thick, rich foam that helps to loosen dirt and grime
• Easy to use and apply

Dodo Juice Apple iFoam Snow Foam Concentrate is a highly concentrated snow foam that is perfect for pre-washing your vehicle before shampooing. It provides a thick, rich foam that helps to loosen dirt and grime from the surface of your vehicle. This snow foam concentrate is safe for use on all surfaces, including paintwork, wheels, and glass. It features a delightful fruity apple scent that will make your car washing experience even more enjoyable.

The Dodo Juice Apple iFoam Snow Foam Concentrate is easy to use and apply. Simply add a small amount of the concentrate to your snow foam lance or foam gun and top up with water. Spray the foam onto your vehicle, let it dwell for a few minutes, and then rinse off with a pressure washer or hose. You'll be amazed at how much dirt and grime the snow foam has removed, leaving your car looking fresh and clean.

Step 1: Dilute the Concentrate

Dilute 1:10 with water to achieve thicker foam for heavier soiled vehicles, and 1:20 with water for lighter washes. (50-100ml in a typical 1 litre snow foam lance bottle)

Step 2: Fill up the Foam Cannon

Pour the diluted solution into a foam cannon or foam gun. Make sure the foam cannon or gun is filled to the recommended level.

Step 3: Apply the Foam

Spray the foam onto the car from the bottom up, making sure to cover all areas of the car. The foam will cling to the car, helping to loosen dirt and grime.

Step 4: Let the Foam Dwell

Let the foam dwell on the car for around 5 minutes. This will give it enough time to break down dirt and grime.

Step 5: Rinse off the Foam

Rinse off the foam using a pressure washer or hose. Start from the top and work your way down. Make sure to rinse off all the foam, including any residue.

Step 6: Dry the Car

Use a microfiber towel or chamois to dry the car. Start from the top and work your way down.