Dodo Juice Future Armour 500mL

Dodo Juice Future Armour Nano Spray is a wet & dry spray sealant that can be used either as a 'aqua (wet) wax' protection topper, or as a stand alone sealant instead of your traditional protection.

Expect up to 3-4 months of longevity within the right conditions, pretty good for a simple spray on application that will leave your paint beading and sheeting water like crazy! Future Armour is chalk-free so it can be used on all trim, glass, metals and of course paintwork wet or dry without leaving any marks behind.

Product Features and Benefits

• Contains advanced ceramic technology for superior protection and durability
• Provides a hydrophobic barrier that repels water, dirt, and grime
• Enhances the shine and depth of color of your car's paintwork
• Can be used on any exterior surface, including glass and wheels
• Easy to apply and long-lasting

Dodo Juice Future Armour is an advanced ceramic sealant that provides ultimate protection and gloss to your car's paintwork. Its advanced nano-ceramic technology forms a durable barrier that repels water, dirt, and grime, keeping your car clean and protected for longer. Its hydrophobic properties also enhance the shine and depth of color of your car's paintwork, making it look better than ever before. Future Armour is suitable for use on any exterior surface, including glass and wheels, and is easy to apply, thanks to its user-friendly formula. Simply apply it to a clean and dry surface using a microfiber applicator, let it cure for a few minutes, and then buff it off with a clean microfiber towel. The result is a durable and long-lasting protection that will keep your car looking its best for months to come.

Step 1: Surface Preparation

1. Ensure the surface to be treated is clean, dry, and free from any contaminants.

2. Wash the vehicle thoroughly using a suitable car shampoo and dry it completely before applying Future Armour.

Step 2: Application

1. Shake the Dodo Juice Future Armour 500mL bottle well before use.

2. Spray a small amount of Future Armour onto a clean microfiber applicator.

3. Apply the product to the surface in a thin and even layer, working on one section at a time.

Step 3: Curing

1. Allow the applied product to cure for a few minutes, allowing it to bond with the surface.

2. The curing time may vary depending on environmental conditions, so refer to the product instructions for guidance.

Step 4: Buffing

1. Once the product has cured, take a clean microfiber towel and gently buff the surface to remove any residue.

2. Use light pressure and ensure that the entire surface is thoroughly buffed.

Step 5: Additional Layers (Optional)

1. If desired, additional layers of Future Armour can be applied for enhanced protection and longevity.

2. Repeat Steps 2 to 4 for each additional layer, allowing proper curing and buffing between applications.

Step 6: Final Touches

1. Once the application is complete, inspect the surface for any missed spots or uneven areas.

2. Make any necessary touch-ups using Future Armour and the microfiber applicator.