Gtechniq L1 Smart Fabric AB 500ml

GTECHNIQ Smart Fabric AB is an advanced fabric protectant with anti-bacterial properties, designed to repel liquids and inhibit the growth of odor-causing bacteria on fabric surfaces. Its innovative formula ensures a cleaner and healthier environment.

This fabric protectant is formulated for use on various fabric surfaces, including upholstery, carpets, and textiles. It effectively repels liquids, stains, and prevents the growth of bacteria, keeping fabric surfaces clean and fresh.

Benefits

• Hygienic Protection: GTECHNIQ Smart Fabric AB creates a barrier that repels liquids and prevents the growth of odor-causing bacteria, ensuring a cleaner and healthier fabric environment.
  
  
• Stain Resistance: The protectant repels liquids, making it easier to clean up spills and preventing stains from setting into fabric surfaces.
  
  
• Long-Lasting Performance: The protective barrier remains effective for an extended period, providing ongoing fabric protection against liquids and bacteria.
  
  
• Easy Maintenance: Treated fabric surfaces require less frequent cleaning, as the protectant helps prevent dirt and spills from adhering to the fibers.
  
  
• Enhanced Durability: Smart Fabric AB helps preserve the appearance and lifespan of fabric surfaces by guarding against stains and bacterial growth.
• Lasts for up 12 months
  
  
• Anti bacterial and anti mould
  
  
• Flurocarbon free

Step 1: Prepare Your Cleaning Supplies

Gather all your cleaning supplies, including GTECHNIQ Smart Fabric AB, clean microfiber towels, and applicator pads.

Step 2: Shake the Bottle

Shake the GTECHNIQ Smart Fabric AB bottle well to ensure that the product is properly mixed.

Step 3: Application

Follow these steps to apply GTECHNIQ Smart Fabric AB to your vehicle's fabric and upholstery surfaces:

1. Ensure that the fabric surfaces are clean and dry before application.


2. Working in a well-ventilated area, apply a small amount of Smart Fabric AB to a clean and lint-free applicator pad.


3. Gently massage the product into the fabric using light, even strokes. Ensure even coverage and avoid oversaturation.

TIPS:

• If using on an interior surface, use TriClean to prepare the surface you are going to treat


• For exterior use, use W5 Citrus All Purpose Cleaner neat for dirty surfaces, or dilute at a ratio of 5:1 with water for less soiled areas


• Make sure the surface you have cleaned is thoroughly dry (for best results 48 hours in good drying conditions) before applying I1 Smart Fabric. For the optimal impregnation of I1 into your fabric, its moisture content must be below 15% which is significantly dryer than touch dry


• Shake well before use and wear gloves


• Apply at a temperature of 5°c or above, in a well ventilated area


• Use out of direct sunlight


• Apply by spraying evenly from a distance of about 15cm ensuring thorough saturation of the surface you are covering


• Make sure your application is thorough as once Smart Fabric has dried, you cannot apply a second coat, as the first coat will repel additional product


• Avoid over spraying on surrounding substrates, if this happens, wipe immediately with a ZeroR Microfibre Buff Cloth. Also wipe any excess from the fabric with an MF1


• Leave to dry for 24 hours, after this time the full effectiveness of the product will be achieved


• Store in a cool, dry place


• Use within 12 months of opening