MetroVac Master Blaster Revolution

MetroVac Air Force Master Blaster dries cars more quickly and safely than any other method “ and is the choice of many professional detailers and car enthusiasts around the world.

The Air Force Master Blaster 8 HP blower will help you eliminate chances of marring, scratching, streaking and water-spotting when drying your cars paintwork. This can be safely used on paint, gel-coat, metals, rims, chrome, plastics, glass and many other surfaces to safely blow away water and dust.

And no more water dripping out of your wing mirrors for hours after you have carefully wiped the car dry “ this is ideal for blasting water out of hard to reach areas such as grills, door jambs, wing mirrors, numberplate holders, engine bays, badges, body crevices, and wheels “ anywhere water can hide. It is also excellent for drying large panels so you can completely dry your car from top to bottom in minutes

Product Features and Benefits:

• 8 Peak HP, 58,500 ft./min. air flow
• Variable speed control
• 10-foot commercial-grade hose
• Heavy-duty construction
• Dual-fan, 2-stage motor
• Multiple attachments included

The Master Blaster is the top of the range from the Metrovac series with twin 4hp motors providing a huge combined 8hp of ˜Air-Power all backed up with 75 years of trusted USA manufacturing from Metrovac.

The Master Blaster Blower is unlike others as it is far more powerful than say a typical leaf blower, so it will dry much quicker, and it is far safer because it uses filtered warm air, ensuring no debris gets blown onto your cars delicate paintwork.

The Metrovac Car Blowers are all safe to use in your own home & garage and run of a standard 240V Australian 10a socket.

Specifications:

Twin 4 HP Motors with dual-speed fans

Twin 4 HP Motors with dual-speed fans “ 8 HP total

Rugged, all-steel construction in a powder-coated finish

Commercial grade 3 meter hose

Can be used for Automotive or Marine

58,000+ ft air per minute (filtered)

EZ Foam Filter for quick replacement

Heavy duty power cord

Neoprene Blower Nozzle

240v Australian Safety Certified

Start with a Snow Foam and rinse, or just your 2 Bucket-Method wash and rinse as normal. Then turn on your Blaster and start to dry from the top of the vehicle and working down, use the MetroVac Air Force Master Blaster to blast away residual water off your main panels, and follow along panel gaps, surrounds and intricate areas including trims “ all the way down to your wheels.

The Team at CCP found working in combination with a soft Mint Microfibre XL Drying Towel to pat down any areas of excess water on roofs, boots or bonnets before it dried was also helpful.

Finish with your favourite Quick Detailer such as Dodo Juice Red Mist, Duragloss Fast Clean & Shine or any other protection spray you have in your detailing kit.

And as with any washing and drying method, the Master Blaster will always work best when your car is protected (wax, sealant or coating) to allow the water to ˜slip off the surface more easily.

Step 1: Prepare the blower

Remove the blower from its packaging and make sure all components are included. Connect the hose to the blower and plug it in to an electrical outlet.

Step 2: Select the right nozzle

The Master Blaster Revolution comes with different nozzles for different cleaning tasks. Choose the nozzle that best suits your needs.

Step 3: Adjust the air flow

Use the control switches on the blower to adjust the air flow and temperature to your desired settings. Higher air flow and temperature settings are best for heavy-duty cleaning tasks.

Step 4: Begin cleaning

Once you have selected the right nozzle and adjusted the air flow, you're ready to start cleaning. Point the nozzle at the surface you want to clean and hold it steady. Move the nozzle back and forth to cover the entire surface.

Step 5: Switch nozzles if necessary

If you need to clean a different surface or switch between different cleaning tasks, switch to the appropriate nozzle and adjust the air flow accordingly.

Step 6: Turn off the blower

Once you have finished cleaning, turn off the blower and unplug it from the electrical outlet. Let it cool down before storing it in a dry and safe place.